Compact pneumatic vise, joy stick operated and air regulated for pressure and speed. Three different sets of interchangable jaws are included for tackling most common repair tasks. Key features:

-Interchangeable jaws
-Vulcanized round for gripping,
-Vulcanized V for shaft doctoring
-Aluminium V for heavy hacking
- Modulated clamping force from 35~350 Lb. (60~120 PSI)
-Bench mount or Vice mount

A powerfull multipurpose pneumatic vise fitted with an assorted set of jaws that can be used for gripping, shaft doctoring etc. Joy stick operated and air regulated for pressure and speed; This vise is ideal for applications that call for fast, tedious and repetitive tasks that may cause wrist injury.

The vise is fixed with a slider that extends 7“ inches away from the edge of the bench for extra wiggle room. The vise is retracted back to the edge of the bench when not in use.
The vise developes in excess of 225 Lbs at a working pressure of 70 PSI and 350 Lbs at pressure of 115 PSI. For most gripping applications a pressure 40 PSI is sufficient for handling light weight shafts. Key features:
-Interchangeable jaws
-Vulcanized round for gripping,
-Vulcanized V for shaft doctoring
-Aluminium V for heavy hacking
-Modulated clamping force from 35~350 Lb. (60~120 PSI)
-Bench mount or Vice mount
-Extends 7" away from workbench's edge

Safely clamps any golf shaft for gripping. Thumb knob quickly and easily adjusts the clamp pressure for use with light weight graphite shafts. Comes with a bench mount bracket that can be removed, rotated 90 degrees and reinstalled for use in a vise.

This nifty micro gripper and shaft vise bolts onto the
transformer stand or a workbench top. The air vise is
joy stick actuated and pressure can be adjusted as
needed. The anti-burst grip blow out duster assists with
grip installation and removal.

A compact pneumatic speed gripper that can be held in a vise, bolted to a bench or mounted on top of our transformer stand. The Speed gripper has a built in air regulator that controls clamping pressure independently from clamping speed. This fine adjustment let the clubmaker control how fast and how much pressure is applied to the shaft.

The 2" diameter cylinder developes in excess of 600 Newton at 300 Kpa which is rougly 130 Lbs. at 43 PSI. This is the maximum recommanded settngs when gripping standard weight shaft. The cylinder max working pressure is 6 bars~90 PSI.

The Clubmaker Multi-Purpose Bench Vise features a 180 degree swivel base to help clubmakers easily perform a variety of clubmaking tasks. Comes with three interchangeable jaws: (1) rubber V design for securing shaft tips, (2) rubber circular design for shaft butts, and (3) solid aluminum V for extracting broken shaft tip stubs.

At Golfmechanix we’ve realized long ago that your workbench is a valuable piece of real estate always in need of serious clutter control!
We've re-engineered the common bench vise turning it into a multipurpose work center for carrying out all those mondaine clubmaking tasks that would otherwise require a plethora of small tools that always seem to end up scattered all over the workbench!
Please click on the option button to view accessories

A handy ratchet vise clamp that automatically adjusts to any size shaft and pressure level. The Jam Cam is ideal for securing shafts and clubs for gripping, cutting, etc.

A compact do-it-all shaft vise suitable for gripping, cutting shafts, shaft extraction, and much more; where holding the shaft securely is a must. Offered with three separate sets of rubber jaws: V-shape, round, and aluminum round. Bolts to a bench or vise.

This is the ideal shaft clamping vise. Suitable for trimming, gripping and other repairs that require a third hand! Powerful 500lb lever action toggle clamp and vulcanized rubber jaws. Good for tips and butts. Hooks up to bench vise.

A compact pneumatic speed gripper that can be held in a vise, bolted to a bench or mounted on top of our transformer stand. The Speed gripper has a built in air regulator that controls clamping pressure independently from clamping speed. This fine adjustment let the clubmaker control how fast and how much pressure is applied to the shaft

The shaft clamp you need for handling super lightweight thin walled shafts. Torque limiting knob screw prevents the application of excessive clamping power prone to cracking shafts.

The shaft clamp you need when nothing else will do. All aluminum construction. Dial-down clamping action. Good for steel and graphite shafts. Clamps tips, butts, and everything else in between!

Vulcanized non-marring rubber pads used for clamping club-heads in a vise. The rubber vise pads are also suitable for clamping golf shafts.

A heavy-duty low profile shaft clamp specifically designed for shaft removal and tapping ferrules into place. Assorted hole sizes fit standard tip shafts. Features a quick open-and-close hinge for added convenience.

The Pro Shaft Clamp grasps a full 3 inches of the shaft tip for a secure hold that will not let go. A great tool for many jobs requiring a secured shaft - particularly shaft removal.

Solid rubber vise clamp secures shafts without damaging the chrome or graphite. Essential for many re-shafting and re-gripping procedures, and an innumerable other club repairs applications.
-Ribbed structure provides a strong grip
-Soft yet strong non marking, non slip polymer
-Secure shafts up to 11 mm tip diameter.
-Good to have for tip trimming

This tough rubber clamp secures shafts at the butt of both steel and graphite shafts. Essential for many club repair procedures like re gripping, butt trimming etc. Key features:
-Soft yet durable non slip non marking rubber polymer
-Ribbed structure provides a strong vise grip
-Large Opening accepts shafts up to 22 mm in diameter.

Used around the shop to clamp golf shafts and clubs for repairs, the metal vise clamp is one of the most essential golf club repair tools. Unique design provides maximum clamping power.

At Golfmechanix we’ve realized long ago that your workbench is a valuable piece of real estate always in need of serious clutter control!
We've re-engineered the common bench vise turning it into a multipurpose work center for carrying out all those mondaine clubmaking tasks that would otherwise require a plethora of small tools that always seem to end up scattered all over the workbench!
Please click on the option button to view accessories