shaft and prepping center with digital speed control, that let a clubmaker set the most efficient speed for cutting steel and graphite shafts, turn down ferrules and prep shaft tips at slower speeds to prevent burn outs and flats and thus overcome all the pitalls that only experienced clubmakers have come to accept and managed to avoid!

This heavy duty prep-ping center roughens shaft tips evenly on both steel & graphite shafts and turns down ferrules on assembled clubs. We've re-powered this design with a motor that has 20% more torque to give clubmakers the ability to cut through and buff heavily soiled clubheads to restore them to like new condition.

This heavy duty prep-ping center roughens shaft tips evenly on both steel & graphite shafts and turns down ferrules on assembled clubs. We've re-powered this design with a motor that has 20% more torque to give clubmakers the ability to cut through and buff heavily soiled clubheads to restore them to like new condition.

The Golfmechanix Shaft cutter and Ferrule prepping centre is the ideal
the small workshop or the occasional clubmaker. Clean, compact and
well thought-out; this design has the power to slice through steel and
graphite shafts, and turn ferrules down to size.

We've re-powered this design with a motor that has 15% more torque,
so that heavier belts can be used to cut through deep scratches and
buff heavily soiled clubheads to restore them to like new condition.

White Linen belts are the preferred medium for thinning down and
blending ferrules without scratching the hosel or shaft. Soft and
flexible, the belt follows the contour easily under light pressure,
which prevents burn marks and an uneven finish

Please click the option button to view selection.

Mounting ferrules on a shaft is neither a fast nor pleasant production step,
as it requires a good level of manual dexterity, focus as well as brawn, and
could be hazardous to both the shaft and operator when fatigue sets in!
We’ve designed this pneumatic ferrule installer for batch processing shafts
trimmed to the same length to improve the precision and consistency of this
critical production step while making the process safe and effortless.

Handy dispenser keeps chemicals such as mineral spirits, acetone, naptha, epoxy remover, and lacquer thinner from evaporating quickly and prevents dangerous spilling. A simple "tap" on the stopper/reservoir with a small towel, and the solvent pools to the top. Capacity 250 ml / 8.5oz

A simple and efficient tool that enables clubmakers to turn down ferrules, flush with the hosel, without the need of a belt sander.

This unique dual purpose tool is used for finishing ferrules to a high gloss finish as well as prepping shaft tips prior to installation. It uses a synthetc lint free cloth strip soaked with acetone on which the ferrule is spun. Nylon roller bearing support the shaft during the process. The lint free cloth strips can be replaced with 80 grit sand paper to prepare shafts, thin down ferrules etc

The semi-automatic shaft prepping and ferrule finishing machine is an essential piece of equipment for the volume assembly workshop. Preps shaft tips consistently in seconds with no variation in tip OD or length. Suitable for steel and graphite shafts. Spare belts available.

The semi-automatic shaft prepping and ferrule finishing machine is an essential piece of equipment for the volume assembly workshop. Preps shaft tips consistently in seconds with no variation in tip OD or length. Suitable for steel and graphite shafts. Spare belts available.

A ferrule turning arm designed around 42" belt sanders.
This design allows the pod to rotate 30 degrees around
its base and has up to 4 inches of reach back and forth.
This makes for a very comfortable position from wich to
thin down ferrules of any size, hosel length or head size.
The shaft rest are made of non abrasive engineering
nylon. Bolts directly to the bench behind the motor.

A small hand-tool designed for installing ferrules of any size to the correct insertion depth. For use on both wood and iron shafts .

Precision tool for inserting ferrules to the correct depth. Bolts onto a bench. Most designs drive the ferrule into the shaft. The key feature of this design is that it does the opposite - the shaft is driven into the ferrule. This prevents ferrules from being blunted.

Ever pushed a ferrule too far up the shaft? Did you just cut it off and throw it away? This simple and ingenious device allows you to easily return a "runaway" ferrule to the desired location (or extract it) without damaging it or the shaft.

A small hand-tool designed for slicing and splitting ferrules prior to shaft extraction.

This is an essential re-shafting tool for Callaway and Ping clubheads. The ferrule shield protects and cools the proprietary ferrule while the head is being heated. The ferrule shield also provides a shoulder on which to push against. Click options for spacer only.