The embodiment of an old new idea used in the old days by senior clubmakers to roll the grip tape over the shaft without seems or wrinkles while keep the hands mostly clean! We've resurected the idea by integrating the "roll bed" directly into the structure of the grip tape dispenser which we've redesigned for the purpose.

If creaseless tape, clean hands, convenience and less clutter are high on the list, this tape dispenser is it!

The "CleanCut" is the latest model in our geared grip tape dispenser lineup, designed to enhance efficiency and minimize tape expensive tape wastage. This dispenser addresses common issues such as torn or wrinkled edges and inconsistent tape lengths, ensuring clean and consistent results.

The embodiment of an old new idea used in the old days by senior clubmakers to roll the grip tape over the shaft without seems or wrinkles while keep the hands mostly clean! We've resurected the idea by integrating the "roll bed" directly into the structure of the grip tape dispenser which we've redesigned for the purpose.

If creaseless tape, clean hands, convenience and less clutter are high on the list, this tape dispenser is it!

Designed as an alternative to using solvents or compressed air, the Classic Blade Grip Remover allows club-makers to reuse rubber or composition grips.

The classic blade grip remover features a channel to funnel solvent under the grip to loosen the tape. The channel also strengthens the blade to give some leverage when working the grip loose. There are no sharp edges that may cut or slice through the grip.

Note: The Classic Blade Grip Remover may not work well with cord grips or Winn grips, grips that have underlistings or grips that do not stretch.

This Classic 20" long grip installer is for removing those jumbo putter grips,
similar to the Odyssey Super Stroke, Winn's Pistol Belly Grip and Ping AVS 17.

This design is an alternative to using solvents or compressed air, allowing club-makers to reuse rubber or composition grips. There are no sharp edges, which prevents damage to grips.

The Spring Rod Grip remover distinguishes itself from the blade style grip remover by its flexibility and edge to edge dual lifting action. Moving the rod in a figure eight motion with a slight solvent dip will help remove the grip with ease

The GOLFMECHANiX Air Gripper is designed to help you quickly install and safely uninstall grips. Thius total kit has two blow out tubes, duster hand high pressure hose fitted with a universal adapter. The blow out tubes are transparent and have machined ridges for better handling. Original grips inclduing oversized putter grips can be removed and preserved for re-installation without damage. Air compressor required.

A robust grip tape dispenser with an automatic
backup tape pick-up mechanism. It uses a set
of gears to drive both the main spool and the
pick up spool so that the back up tape does not
get entangled.

Mounts onto 100732 and 100726 using our 1007XX-U2 mounting bracket

designed with an integral guillotine cutting mechanism, the "CleanCut" produces wrinkle-free strips of tape with precisely squared edges, cut to the desired length. Its efficient operation reduces waste, minimizes frustration when rushing through several sets of golf clubs, realizing significant cost savings over its serviceable working life.

Built identically to the standard geared
grip tape dispenser, this model adds a
second spool to dispense grip build up
tape, eliminating the need for a second
grip tape dispenser.

Mounts onto 100732 and 100726 using our 1007XX-U2 mounting bracket

The only grip tape dispenser that dispenses the desired length of
grip tape accurately each and every time. The geared mechanism
dispenses grip tape from 1” to 11” in length. The back up tape is
automatically spooled leaving fingers dry and clean

Mounts onto 100732 and 100726 using our 1007XX-U2 mounting bracket

This dual purpose, cost saving grip tape
dispenser features both the metered grip
tape dispensing capability of the base
model and a second spool for dispensing
build up tape, eliminating the need for a
second grip tape dispenser.

Mounts onto 100732 and 100726 using our 1007XX-U2 mounting bracket

Handy dispenser keeps chemicals such as mineral spirits, acetone, naptha, epoxy remover, and lacquer thinner from evaporating quickly and prevents dangerous spilling. A simple "tap" on the stopper/reservoir with a small towel, and the solvent pools to the top. Capacity 250 ml / 8.5oz

A universal grip alignment laser powered by two industrial grade diodes producing a super bright trace that projects down the shaft centerline to aid with grip alignment. For use this gripping laser with Golfmechanix 100725,100726 and 100732

A universal grip alignment laser powered by two industrial grade diodes producing a super bright trace that projects down the shaft centerline to aid with grip alignment.

For use with Golfmechanix 100650,170206,100605*, Golfworks GGS and GW0051
*May need to remove grip tape dispenser

A universal grip aliment laser powered by two industrial grade diodes
producing a super bright trace that projects down the shaft centreline
to aid with grip alignment. The pod installs directly on top of the vise
clamp just ew inches above the grip with the trace projecting fore
and aft along the length of the club.

An essential re-gripping tool for replacing worn-out grips and installing
new ones over large butt shafs . The installer stretches the grip mouth
evenly and guides it over the taped shaft. A must-have tool to prevent
grips from splitting during installation.

A tape scraper that easily peels off old grip tape
on steel and graphite shafts. A special bull-nose
blade prevents gouging the shaft!

This is not a throw away grip tape remover and
does not require sharpening as the blade can be
discarded & replaced!

The Tape Removal Shaft Holder is a device designed to hold the shaft in place and prevent damage to shafts during tape removal. One end inserts into the shaft, while the other is secured in a vise. The plastic safety stopper helps prevent the knife blade from breaking or losing its edge.

The best of the best utility knife for removing old grips, plastic collars, etc. The compound configuration positions the hand at the correct angle over the work. This allows firm and precise control of the blade while cutting, especially when pushing away from the body to prevent injury.

Industrial Strength Utility Knife is a heavy duty, quality knife with an ergonomic form factor for a secure hold.The Fast Change Blade option allows for blades to be changed with a quick twist of blade locking switch eliminating the need to disassemble the knife to simply replace the blade.

A gripping pan that has a wide brim, slanted sides and a deep bottom to
prevent splatters and spills and helps with recycling expensive solvents to
the last drop!
This pan hooks up in seconds under the ledge of a workbench or in a
clamping vise. It is held securely in place by a slotted metal bracket that
makes installation and storage a snap. The gripping pan won’t sag or tip
over like a paint tray or liner.

A Solvent recovery pan well suited for high volume gripping where the shaft
butt is dipped directly into the solvent to wet the grip tape. This is a potentially
huge time saver for the volume assembler.
The deep and narrow pan design is good for minimizing solvent use and the
containement spill flaps double up as a cover to minimize evaporation when
the unit is not in use.

A powerful 5mW 670 nm Industrial grade laser tracer fitted with a universal mount that allows free standing installation with a high degree of adjustment over any gripping station. This could be a slat wall panel, a wall bracket or a telescopic pod Power to the laser is supplied by a universal AC/DC adapter.

The putter grip installation gauge is designed to assist in the proper
installation of putter grips. It provides a visual reference for aligning
the grip in relation to the putter top line so that the flat side of the
putter is always alined with the target.