This Convenient “lazy-Susan” style
rotating swivel stand allows for good
visibility and access when measuring
club-heads. It reduces fatigue and
improves productvity.

A calibration standard designed for verifying the settings and geometrical accuracy of all our 010xxx lie and loft measuring gauge and any other measuring gauge that’s built around our standard. This calibration standard is CNC machined from Aluminum and is hard anodized to minimize wear and tear. The calibration standard has 10 degrees of loft and 60 degrees of lie.

A professional heavy duty golf clubhead measuring gauge used by casting houses and OEM manufacturers to specify lie and loft angle, hosel offset, face progression, face angle, bulge, roll, and hosel to sole length measurements - on both woods and irons (where applicable).

This HDI, Heavy Duty Industrial gauge is built on the same frame as
the standard analogue model and is the result of an incessant drive
towards greater production efficiencies and tighter manufacturing
specifications.

The hosel to sole (HTS) measurement is an important specification used in clubhead analysis. The HTS gauge can be used in conjunction with lie and loft measuring gauges and clubhead CG locators.

Precision-turned and ground control rods for accurately mounting un-shafted wood, iron and putter heads in lie and loft measuring gauges.

This is a must-have tool for referencing the shaft center-line, which is essential for accurately measuring loft, lie, hosel offset, and face progression. All common tip sizes are included in the set. Works with most lie and loft measuring gauges. The set includes rods suitable for .335, .350, .370, .395, and .410. Holding stand included.

A lie and loft measuring gauge optimized to account for the latest design trends and specifications driving the development of oversized drivers. The loft and face angle gauge were completely redesigned to permit the "probes" to be placed at specific points across the club face, allowing loft and face angle measurements to be made that account for roll and bulge.

The Designer’s Digital Lie & Loft Measuring Gauge addresses the
clubhead designer, quality control technician and professional
club fitter’s need for speed, accuracy and the ability to capture
and save clubhead measurements for analysis.

Built with an eye for simplicity and refined for over two decades,
this gauge is rugged, precise and easy to use. It Offers great value
to clubmakers who need to measure clubhead specifications
occasionally to a good degree of accuracy on virtually any
conforming Driver, Hybrid, Iron, Wedge or Putter.

Built with an eye for simplicity and refined for over two decades,
this gauge is rugged, precise and easy to use. It Offers great value
to clubmakers who need to measure clubhead specifications to a
good degree of accuracy on virtually any conforming Driver,
Hybrid, Iron, Wedge or Putter.

A lie and loft measuring gauge for fitting labs and studios.
This is a highly functional and easy to use instrument built
around the latest trends in clubhead design. It can manage
dimensionally non-conforming clubheads with ease.

The Apprentice spec gauge is based on the clubmaker's
spec gauge and was developed as a training aid to equip
students taking golf management and club-making
courses as part of their curriculum.
The apprentice spec gauge offers the same level of
accuracy as the clubmaker’s design but does away
with the shaft slider and the adjustment on the face
height apron.

A simple and functional lie and loft gauge that offers the
dedicated hobbyists the means to survey a whole set of
clubs with reasonable accuracy.
This gauge is suitable for both right and left handed woods,
hybrids, irons,and putters. This gauge measures: lie, loft,
face angle, face progression and Hosel offset.

lie and loft guage specimen used by Golf's governing bodies and some OEM's to explore golf club head specifications sequentially rather than concurrently.

Sequencing club head specifications allows for the measurement of lie, loft and face angle independently of each other while the head is manipulated to assume the most advantageous position specific to each variable.

A lie and loft gauge specimen used by Golf's governing bodies and
some OEM's to explore golf club head specifications sequentially
rather than concurrently.
Sequencing club head specifications allows for the measurement of lie,
loft and face angle independently of each other while the head is
manipulated to assume the most advantageous position specific to
each variable.

The 2 1/2 inch protractor makes measuring loft a snap while the club is secured in a measuring gauge. The 2 1/2 inch radius better accommodates the larger clubhead sizes more commonly used in today's designs.

Gauge measures face-to-sole angle dimensions of all clubheads including woods, hybrids, irons and putters. Sole measurements in centimeters. All stainless steel construction.

A compact and economical hand-held protractor for measuring the lie and loft angle on club heads. Great for also measuring the hosel exit point on bore-through designs.

This is the most economical way to measure the most important clubhead specs. The gauge is capable of measuring loft, lie, face progression, offset and sole bounce on all types of clubheads - both right-hand and left-hand.

The Golfmechanix Tournament lie and loft measuring gauge is designed
for the golf professional working both on and off the golf course, where
most lie and loft gauges costing hundreds of dollars more are too clunky
and not practical enough to carry around.

The Golfmechanix Tournament lie and loft measuring gauge is designed
for the golf professional working both on and off the golf course, where
most lie and loft gauges costing hundreds of dollars more are too clunky
and not practical enough to carry around. This gauge is for left handed clubs.

The Universal Lie & loft gauge distinguishes itself from the Tournament gauge with its slightly larger frame and longer slider needed for working around big drivers. Lie and loft angles are measured using four contact points straddling the bulge and roll curvature in the plane and at the center of the club-face. While this method does not allow the face angle to be compensated for when loft is measured, it is still adequate for pin-pointing weaknesses associated with trajectory and distance.

A classic bounce angle gauge designed by Ralph Maltby and refreshed by
Golfmechanix with permission. This version has all the functionality of the
original design to which we've added a few more practical features, turning
this gauge into a complete wedge customization and design work station.

A must-have tool for custom fitting short irons, specialty wedges, and utility clubs. Measures bounce and dig angle, sole width, and leading edge height. Compact design with magnetic base. Easy to use. Accurate to within 0.5 degrees.

The AUDiTOR RII Clubhead Dimensioning Gauge was designed in accordance with the latest USGA and Royal and Ancient Rules of Golf Appendix II, governing the conformance of clubheads. The AUDiTOR RII is a state-of-the-art gauge that enables a quick and precise dimensioning of woods in one easy setup. Please inquire for availability and leadtime.