An affordable EI Shaft analyzer and Modeler that has more
capability than any other instrument in the class!
A new development from Golfmechanix that has been in the
works since 2006 now made possible thanks to the availability
of high precision, moderately priced servo drives and controllers!
Maps shafts geometry, straightness, bending profile, spring rate
torque, frequency, spine and calculates young's modulus, Shear
modulus, polar momment, bend point etc.

Designed primarily for OEM golf club manufacturers for bench marking the suitability of structural epoxy adhesives to be used for shafting golf clubs in a production environment.
The Auditor Omega Digital epoxy cure system provides both the control and accuracy needed to develop unique curing profiles that drastically cut down handling time between assembly steps without compromising optimal adhesive performance.

The Industrial Golf Club Curing rack on wheels is the idea
solution for carting clubs out of the way after assembly to
let the epoxy bond cure without disturbance.

The rack accommodates up to 44 /22 clubs of any type as
the rack can be adjusted for lie and length in seconds!

The Base of the display is covered with an alveolar foam
that moulds around the heads to prevent slippage when
moving the cart.
The cart ships flat with all the accessories needed for
self assembly.

The Industrial Golf Club Curing rack on wheels is the idea
solution for carting clubs out of the way after assembly to
let the epoxy bond cure without disturbance.

The rack accommodates up to 44 /22 clubs of any type as
the rack can be adjusted for lie and length in seconds!

The Base of the display is covered with an alveolar foam
that moulds around the heads to prevent slippage when
moving the cart.
The cart ships flat with all the accessories needed for
self assembly.

When it comes down to accuracy, reliability and versatility, nothing comes
close to the Integra Lie & loft digital bending gauge! We’ve build this machine
from the ground up using our tried and true kinematic frame geometry and
have adopted an all steel construction to give it the strength and durability to
last clubmakers a life time of service.

*Bending bar sold separately!

The EVOLUTION II Digital Putter Bending gauge epitomizes our know-how into one feature packed design that mirrors the ease of use, functionality and dependability that made our bending gauges the preferred choice of professional clubmakers and fitters worldwide

*Bending bar sold separately!

Engineered from the ground up for small manufacturing work cells,
assembler and the high volume clubmaker; This self contained air
powered gripping station ticks all the boxes when it comes down to
functionality, high output, precision, and a low operating cost.
Self standing and fully adjustable; the frame has a comfortable form
factor where all the components are logically positioned within
arm’s reach for either right handed or Left handed operation. The
broad work top with the reposition-able side trays and integrated
club rack help minimize clutter.

Mounting ferrules on a shaft is neither a fast nor pleasant production step,
as it requires a good level of manual dexterity, focus as well as brawn, and
could be hazardous to both the shaft and operator when fatigue sets in!
We’ve designed this pneumatic ferrule installer for batch processing shafts
trimmed to the same length to improve the precision and consistency of this
critical production step while making the process safe and effortless.

The Auditor HD Digital Swing Weight Scale is designed for cellular golf club assembly units in need of quick and accurate swing weight measurements at
critical stages of the assembly process.

This production model has quality control functions that are easy to setup and operate.

A specialist instrument for locating and measuring the CG coordinates of any golf clubhead in three axes, to within 0.5 mm. Also measures the CG angle of the club head. High precision electronics with advanced data collection software included. Please inquire for availability and lead-time.

Designed by special request for casting houses to aid in the implementation of the R&A/USGA Club-Head Groove Conformance rule. This infinitely variable adjustment vise provides the level of flexibility and ease of use needed to secure the club head to be scanned under a stylus type contour tracer with a high level of precision.

Suitable for both woods & irons, including drivers and hybrids, the vise gives the operator all the control needed to position, align and clamp the club-head in one easy setup, thanks to the visual alignment aids built into the design without interfering with the stylus escapement direction.

The GolfMechanix R&A/USGA Conforming Groove Profile Cutter Checker is designed for checking the width and angle of cutters used specifically for engraving grooves on clubheads.

This easy to use precision microscope is an inexpensive alternative to the more expensive, cumbersome and difficult to use Shadowgraphs.

This compact desktop device features a special chuck/blade holder that positions the blade flat in relation to the viewing angle, so it can be measured accurately on a high-resolution reticle with a precision of 0.01 mm and a magnification of 20x.

A blur-removing sharp focus LED light, helps enhance edge contrast for added precision.

An industrial shaft cutter with a proven track record for reliability
and safety. We've built well over 30 machines to date, some of
which have been highly customized at the operator's request to
work within established production systems. OSHA compliant.

A professional heavy duty golf clubhead measuring gauge used by casting houses and OEM manufacturers to specify lie and loft angle, hosel offset, face progression, face angle, bulge, roll, and hosel to sole length measurements - on both woods and irons (where applicable).

The Designer’s Digital Lie & Loft Measuring Gauge addresses the
clubhead designer, quality control technician and professional
club fitter’s need for speed, accuracy and the ability to capture
and save clubhead measurements for analysis.

A lie and loft measuring gauge optimized to account for the latest design trends and specifications driving the development of oversized drivers. The loft and face angle gauge were completely redesigned to permit the "probes" to be placed at specific points across the club face, allowing loft and face angle measurements to be made that account for roll and bulge.

lie and loft guage specimen used by Golf's governing bodies and some OEM's to explore golf club head specifications sequentially rather than concurrently.

Sequencing club head specifications allows for the measurement of lie, loft and face angle independently of each other while the head is manipulated to assume the most advantageous position specific to each variable.

A lie and loft gauge specimen used by Golf's governing bodies and
some OEM's to explore golf club head specifications sequentially
rather than concurrently.
Sequencing club head specifications allows for the measurement of lie,
loft and face angle independently of each other while the head is
manipulated to assume the most advantageous position specific to
each variable.

The AUDiTOR RII Clubhead Dimensioning Gauge was designed in accordance with the latest USGA and Royal and Ancient Rules of Golf Appendix II, governing the conformance of clubheads. The AUDiTOR RII is a state-of-the-art gauge that enables a quick and precise dimensioning of woods in one easy setup. Please inquire for availability and leadtime.

A self contained cabinet style gripping station equiped
with all the productivity tools a clubmaker can imagine!
Designed for OEM use in small manufacturing cells, This
Design is pneumatic, has a build in solvent dispensing
System that wets both the grip tape and grip. Auto cut
length grip tape dispensers , bifocal lasers are fitted as
standard and so is the fume extraction hood that makes
this unit OSHA compliant. All the controls are foot operated
leaving the operator to focus on proper grip installation.
Production capacity is over 60 grips/hour.