190440

Universal Shaft Chuck

Golfmechanix Universal Shaft Chuck is a shaft tip I.D. drill guide. The tip

end of the shaft chuck incorporates a drill bit guide for boring out a shaft

tip that is solid with epoxy, once thehead has been has been extracted

from a club-head to allow air to escape from the hosel when the shaft is

re-epoxied into another head.

Running a 5/32" bit or smaller through the chuck's drill guide will ensure

that a perfectly parallel bore is drilled through the shaft's axis. It is impor-

tant to avoid contacting the inner diameter walls of the shaft with the drill

bit due to possible damage to structural integrity. The universal shaft

chuck ensures that every drilling operation is 100% safe without any

contact to the shaft's walls.