HEAVY DUTY INDUSTRIAL
H
110V / 220V
200323
Programable Epoxy Cure System 3
A compact version of our Auditor Omega Programable Curing Rack,
this unit offers all the features and advantages of the original
design but with a smaller foot print.
With just 3 heating pegs, this unit heats faster and is more
responsive because of the smaller thermal load and higher power
density available. Temperature rise and soak time at target
temperature are controlled by the Auditor Omega proportional
controller to a narrow band not exceeding +/- 3
O
C.
Best suited for smaller labs, custom club retail fitting stations and
tour vans working to tight deadlines.
The Auditor Omega’s bi-directional receipe upload/download
function with cure cycle data recording capability are also retained
on this unit.
Curing rack can be mounted onto
a work bench, secured to a shelve
or hung on a dry wall.
Key Features:
-Programable
temperature controller with accuracy of +/- 3°C.
-On board memory for 10 user defined adhesive curing profiles.
-Handles 1 hour cure cycle at 50~200
o
C / 122~392
o
F per step.
-Holds up to 3 clubs, allowing ample spacing between clubs.
-Powerful, 500W sealed heater cartridge.
-Data collection & programming software included.
-USB Upload & download of curing profiles.
-Compact wall mount installation reduces footprint!
QR CODE
Data collection software, USB cable and fastners included.
Temp
Off
+3
On
-3
Off
+3
On
-3
Temp Variance +/- 3
Set
Temp2
T
emp1
Set
Rise
Time Load
Dependent
▲Multi
line LCD display with prompts
and 3 Buttons interaction simplify
operation
▲The
epoxy curing rack is ideal for
batch bonding adapters, as well as
preheating adapters prior to shaft
extraction
Rise
Time Load
Dependent
Room
Temp
▲Thermal
imaging shows heat transfer
path and temperature distribution
▲Typical
2 stage cure cycle with rise time offset to
ensure adequate soak time at temperature
Time