Excellent for finishing and re-conditionning hosel bores to a

high degree of accuracy and surface finish. These straight

Fluted hand Reamers are made to exacting specification and

are designed to enlarge hosel bores by 0.003" / 0.1 mm to

provide a good allowance between the shaft and hosel for the

perfect epoxy bond!

190010

Manual Straight Fluted Reamer set

Drill Press Operation:

While specifically designed for hand reaming operations, both

reamers (straight & Fluted) can be used on a drill press running

at 150 RPM or below. Slow cutting speed combined with a

moderate feed speed and generous lubrication yields the best

results and prolongs tool life considerably!

-High Speed Steel cuts through most alloys including 17-4PH and 6AL-4V

-Enlarges hosels up to 0.003" / 0.1 mm (Nominal)

-Drill press compatible at or below 150 RPM depending on alloy

-Tapered lead guides reamer into the hosel bore (Straight reamer only)

-Universal reamer handle with square stock included with each kit.

Key Features:

190010-335 Φ 8.5 mm

190010-350 Φ 8.9 mm

190001-02

Square stock 1/4” reaming handle included with each reamer set.

190010-370 Φ9.4 mm

190001-10

Reamer Chucking Handle 1/4"