QR CODE

150505

Classic Pro-Tour Bending Gauge

A classic and up to date design that harkens back to the days when clubhead

manufacturers followed the 24/38 benchmark*

All that a clubmaker had to do back then was to mount the iron in the gauge at

the corresponding clubhead number to determine whether the iron had a

stronger or weaker loft, and by how many degrees it had to be adjusted to yield

the distance gap and flight trajectory that worked best for the golfer.

However and with today’s clubhead makers deviating from the established

nomenclature; It has become difficult for clubmakers to distinguish a 5 iron that

falls under the 24/38 benchmark and the 5 iron that isn't. This is where the

Classic Tour Pro distinguishes itself as it re-establishes the correct loft for each

iron's position in the set to closing the distance gap evenly between clubs.

Key Features:

-Designed to the 24/38 benchmark for Loft & length progression

-Short stroke, closest to the hosel protractor arrangement

-Has the widest adjustment range of any bending gauge

-Shaft always upright, reduces walk-around space requirement

-Fitted with our best ever Isostatic clamping system

-Works for irons, hybrids, wedges and chippers.

-Back clamp with quick release split nut (rarely needed!)

-Wide range of optional accessories

-Fits on all our 1507xx bending stands and swivel tops

X4

X4

X4

▲24/38

Locator starting at 17

o

for

the One iron through to UW at 64

o

▲Reliable

isostatic clamping system using

▲Hybrids

are easily secured using the flex

▲Good

visual alignment using the bevelled

configurable offset brass sheaves and pads. clamp, soling pads and back clamp

guide against the clubhead grooves.

*Wishon golf. The Loft Disease & Maltby Golf Club Design / 4th ed book