130645

100/110V/220V

Compact Shaft Cutter And Ferrule Prep-ping Centre

The Golfmechanix Shaft cutter and Ferrule prepping centre is the ideal

the small workshop or the occasional clubmaker. Clean, compact and

well thought-out; this design has the power to slice through steel and

graphite shafts, and turn ferrules down to size.

ility

etailing capab

With Club D

We've re-powered this design with a motor that has 15% more torque,

so that heavier belts can be used to cut through deep scratches and

buff heavily soiled clubheads to restore them to like new condition.

Key Features:

-High Torque 1/3 Hp 3400 RPM motor

-1”x30“ belt driven at 3525 ft/min or 1068 m/min

-Spring tensioned belt with quick release lever

-Guarded belt with dust discharge vacuum port

-Adjustable ferrule turning arm

-Good selection of preppping and finishing belts

-Super thin, low dust, high efficiency 6” cut off disc

-Fast cutting action at 5287 ft/min or 1602 m/min

-Guarded cut off blade with dust vacuum port

-Spring loaded shaft clamp prevents spinning

-Shaft tipping scale with clear markings

-Motor mounted on vibration dampers to frame

-Frame bolts onto a work bench or stand.

-Select 100, 110 or 220 Volt AC. Ships with U.S,

continental and British AC socket adapter.

80G

120G

240G

FSR

FL

FLS

N264

FF

MG30

1306xFFC

▲Dry

compound

applied in steps on

felt belt used for

buffing clubheads to

a mirror like finish

QR CODE

▲Precision

shaft tipping made easy.

▲Tip

prepping. Shaft tip rides between

▲Turns

down ferrule to size over the

▲Remove

minor scratches and restore

With the spring loaded clamp.

gap and belt for easy control.

1”linen belt using the turning arm.

luster to worn out clubs.

SP-G0403-0401-P10

▲Duralox

HE .High Efficiency cut-off

disk for steel & graphite.