130601

Universal Ferrule Turning Arm

Reinforced one piece construction provides

a stiff and stable platform when buffing

ferrules or polishing heads.

130631-SK21

Shaft rests for 1306xx Shaft and Ferrule

prepping centers

A universal Ferrule turning arm that's bolts

behind a 30 or 42 Inch belt sander and at a fixed

height. The turning arm can rotate around its

own axis and slide fore and aft away or towards

the belt, so that the ferrule is presented at the

right angle towards the belt.

unlike any other turning arm on the market; this

design feature a one piece C-chanel construc-

tion that's very rigid and that can be easily

bolted down and rotated without having to drill

new holes in the work bench.Shaft rest height is

350 mm (13”3/4) and reach 250 mm (10”)

QR CODE

How to Use the Protective tape

1

2

QR CODE

Cut the stripof material length wise right

down the middle.

Peel off the backing tape and apply the strip.

Apply pressure after positioning.

3

4

▲Rotates

15 degrees left or right

▲Slidable

shaft rest fore and aft

▲Non

scratch shaft rest.

The soft felt pads can be applied to all of the Soft and smooth surface will not damage the

Golfmechanix turning arms.

shaft