UDITOR

R

070500

Precision Golf Club Head CG Locator

▲The

process starts with an accurate

Measurement of the CG angle.

QR CODE

▲The

CG along the Z axis is measured

first

The Auditor Golf Club Head CG locator CGL was the first commercially available instrument club-head designers and

engineers could buy off the shelf to make their design work progress reliably and at a much faster pace. Today, the Auditor

CGL is still the fastest way to quickly and accurately locate the 3D coordinates of a clubhead’s CG with an accuracy of 0.1 mm

in under 5 minutes.

The Auditor CGM is also capable of surveying critical dimensions such as CG angle, face angle, Face centre including Maltby's

“C dimension” and other measurements critical to club head performance

and which measurements can be traced over a

club-head using Cartesian coordinates with the help of a mechanized arm mounted on a digitized X-Y track.

The capability built into the Auditor CGM is a good way for any one involved in the design and manufacture of club-heads to

compare CAD generated mass property measurements against physical prototypes and pre-production samples.

CAD can tell you where the CG of the club head is going to be. The Auditor CGM will tell you where it actually is!

-Capacity

-Moment load max

-Resolution

-Safe overload

-Sampling rate

-AD converter

-Zero Balance %RO

-Repeatability %RO

-Accuracy +/-

▲The

CG along the X axis is measured

second.

Specifications

▲The

Y axis is measured last, with all

coordinates measured in 4 easy steps.

▲The

CG construction lines are drawn

▲Additional

measurements can be

using the built in mechanical arm.

made using construction lines etc.

1000 grams

7 grams / mm

1/10000

110% full scale

4~132 t/s

16 Bit dual slope

+/-0.030

+/-0.02

0.5 mm or better

Accessories included

-Hosel bit adapters woods & irons

-Face angle gauging probe

-Sole tangent gauging probe

-Angle protractor

-Pen holder and pen

-Calibration weight

-Detailed instruction manual