Search    
User Info

New Products Sales Clearance Download

Contact Us

Follow golfmechanix on Twitter

ABOUT SSL CERTIFICATES

New Products

030125-HD  Pneumatic Frequency Profiling Analyser
US$736.50
A Brand new semi-automated frequency analyser design built around our super stable and highly successful load cell technology which has driven our line of reference analysers for the past 2 decades.
Key design features of this new development were driven for the most part by the shaft manufacturer's need for speed and reliability when testing shafts coming off the production line. We've also integrated several small refinements into the design demanded by advanced clubmakers heavily vested into shaft customization powered by proprietary shaft databases built around advanced shaft profiling systems (APS).


Relate PartsOptions
  Quantity:
030010
030010
Clubmaker's Standard Calibration Stick
US$108.25
Qty:
030125-U1
030125-U1
APS Beam upgrade for 030125-HD
US$89.00
Qty:
030125-U2
030125-U2
Bar code Printer support port for 030125-HD
US$75.00
Qty:
SP-E060101
SP-E060101
Universal voltage AC/DC adapter 9V 500mA
US$10.25
Qty:
  

050900  Shaft EI Analysis and Modelling Sytem
US$ ASK!
An affordable EI Shaft analyzer and Modeler that has more
capability than any other instrument in the class!
A new development from Golfmechanix that has been in the
works since 2006 now made possible thanks to the availability
of high precision, moderately priced servo drives and controllers!
Maps shafts geometry, straightness, bending profile, spring rate
torque, frequency, spine and calculates young's modulus, Shear
modulus, polar momment, bend point etc.


 

Makes Quick Work of Grip Installs & Removals
110851-UA  Air Gripper
US$47.50
The GOLFMECHANiX Air Gripper is designed to help you quickly install and safely uninstall grips. Thius total kit has two blow out tubes, duster hand high pressure hose fitted with a universal adapter. The blow out tubes are transparent and have machined ridges for better handling. Original grips inclduing oversized putter grips can be removed and preserved for re-installation without damage. Air compressor required.


  Quantity:

210908  Reverse thrust Progressive Shaft puller
US$600.00
A new concept in shaft extractor capable of developing up to 3,000
Lbs. of thrust against the hosel effortlessly with less than 3 Ft/Lbs
of torque (1350 kgf @ 0.4 kgf) torque applied at the handle!
For this design We've leveraged the low friction recirculating ball
screw and down ramp thread profile to produce a multiplier effect
which is further enhanced by transferring and distributing the load
directly to the casing instead of the lead screw itself!


Relate PartsOptions
  Quantity:
210200I-P3
210200I-P3
Hosel Lip Protectors for Irons Pack of 3
US$5.25
Qty:
210200W-P3
210200W-P3
Hosel Lip Protectors for Woods Pack of 3
US$5.25
Qty:
210225
210225
Aluminum hosel protector
US$7.25
Qty:

In the workshop and the driving bay
231130-22  Compact High density club racks on Wheels for 22 clubs
US$150.00
The Industrial Golf Club Curing rack on wheels is the idea
solution for carting clubs out of the way after assembly to
let the epoxy bond cure without disturbance.

The rack accommodates up to 44 /22 clubs of any type as
the rack can be adjusted for lie and length in seconds!

The Base of the display is covered with an alveolar foam
that moulds around the heads to prevent slippage when
moving the cart.
The cart ships flat with all the accessories needed for
self assembly.


  Quantity:

231130-44  Industrial Twin Racks on Wheels 44 clubs
US$195.00
The Industrial Golf Club Curing rack on wheels is the idea
solution for carting clubs out of the way after assembly to
let the epoxy bond cure without disturbance.

The rack accommodates up to 44 /22 clubs of any type as
the rack can be adjusted for lie and length in seconds!

The Base of the display is covered with an alveolar foam
that moulds around the heads to prevent slippage when
moving the cart.
The cart ships flat with all the accessories needed for
self assembly.


  Quantity:

231700  Club head component display
US$65.00
A great looking Golf club component display
that's designed to give the illusion of fully
assembled clubs at eye height!

This display canbe placed on top of a counter
or it can be hung on a slat wall panel. There
is room for 3 heads mounted on a dry fit
mandrell, Grips and leaflets. The back board
is slides into a recess and can be easily made
to fit your promotional message.


  Quantity:

301018  Japan's Universal Golf Catalogue 2018
US$80.00
Published yearly since 1975 the Universal catalogue is an original golf business directory listing well over 300 companies across 800 pages of high quality photos and catalogue extracts covering everything from original golf head designs for woods, irons, putters, shafts, grips, bags, head covers, shoes and everything else in between.

This is a must have catalogue for anyone who's in the business of golf innovations, importers, dealers and distributors.

Order your copy today while supplies last!


  Quantity:

070605  R&A and USGA Golf club Head CT Pendulum
US$6,695.00
Used by major clubhead manufacturers to test for a "Spring Like Effect" of a clubhead striking face - whether woods, hybrids and irons - as specified by the R&A/USGA testing protocol for the determination of a clubhead's Characteristic time (CT).
The AUDiTOR CT distinguishes itself from similar devices by the precision and quality of its build and a second to none customer service. Whether used on the production floor or in the lab, the AUDiTOR CT will provide peace of mind test after test. This machine is sold to R&A/USGA license holders only. Machine ships ready to use. Light assembly required.


Relate PartsOptions
 
070600-1
070600-1
Alignment Laser for the R&A/USGA Portable CT Pendulum
US$40.25
Qty:
070600-A335
070600-A335
.335 Clubhead Setup shaft to head Connector for R&A/USGA test Pendulum
US$43.25
Qty:
070600-A355
070600-A355
.355 Clubhead Setup shaft to head Connector for R&A/USGA test Pendulum
US$43.25
Qty:
070600-A370
070600-A370
.370 Clubhead Setup shaft to head Connector for R&A/USGA test Pendulum
US$43.25
Qty:
070600-A410
070600-A410
.410 Clubhead Setup shaft to head Connector for R&A/USGA test Pendulum
US$39.25
Qty:
070600-CAL
070600-CAL
R&A CT calibration Standard
070600-S335
070600-S335
.335.Head to shaft Connector for R&A/USGA test Pendulum. Ea.
US$27.50
Qty:
070600-S350
070600-S350
.350 Head to shaft Connector for R&A/USGA test Pendulum. Ea.
US$82.00
Qty:
070600-S370
070600-S370
.370 Head to shaft Connector for R&A/USGA test Pendulum. Ea.
US$86.00
Qty:
070600-TH
070600-TH
Tee Handle for 070600-A (.335, .355, .370 and .410)
US$39.25
Qty:
SP-E0703-01
SP-E0703-01
CR2 battery for 030405 Frequency Laser tip weight
US$6.25
Qty:
 

150951D  Digital Univeresal Bending Gauge
US$1,599.00
A universal lie and loft bending guage that does woods, irons, hybrids with brilliance!
This new design is built on the 24/36 variable geometry frame of our highly
evolved 1509xx series. This arrangement sits the clamped club with the hosel
upright, making the club easier to work with and improves bending accuracy.

Powered with our digital Auditor PI engine, this outstanding bending gauge can now
measure as you bend which help mitigate the springback effect on those soft and
maleable irons, and fariways with bendable hosels!


Relate PartsOptions
  Quantity:
151001
151001
Kinetic Arch Clamp System
US$200.00
Qty:
151002
151002
Face Clamp Pressure pads
US$29.50
Qty:
151003
151003
2DOF swivel pads
US$85.00
Qty:
SK-X0109-12
SK-X0109-12
Hybrid Top Clamp Assembly for 153xxx, 150xxx & 15095x
US$24.75
Qty:
SP-E060101
SP-E060101
Universal voltage AC/DC adapter 9V 500mA
US$10.25
Qty:
 

100650  Compact Pneumatic Speed Gripper
US$520.00
A stand by bare-bone industrial pneumatic gripping station
that can be installed anywhere on a production line quickly to
speed up assembly. Bolts onto a workbench or our transformer
stand.


Relate PartsOptions
  Quantity:
110851-UA
110851-UA
Air Gripper
US$47.50
Qty:
100011
100011
Transformer Universal Portable gripping stand
US$219.00
Qty:
 

1306xFL  Ferrule Finishing White Linen (Soft)
US$ ASK!
White Linen belts are the preferred medium for thinning down and
blending ferrules without scratching the hosel or shaft. Soft and
flexible, the belt follows the contour easily under light pressure,
which prevents burn marks and an uneven finish

Please click the option button to view selection.


Relate PartsOptions
 
SP-G0401-30x1xFL
SP-G0401-30x1xFL
1x30 Ferrule Finishing white Linen (Soft)
US$2.25
Qty:
SP-G0401-42x1xFL
SP-G0401-42x1xFL
1X42 Ferrule finishing white Linen Belt (Soft)
US$2.50
Qty:
 

130900  Semi Automatic pneumatic ferrule installer
US$1,850.00
Mounting ferrules on a shaft is neither a fast nor pleasant production step,
as it requires a good level of manual dexterity, focus as well as brawn, and
could be hazardous to both the shaft and operator when fatigue sets in!
We’ve designed this pneumatic ferrule installer for batch processing shafts
trimmed to the same length to improve the precision and consistency of this
critical production step while making the process safe and effortless.


Video Reference
  Quantity:

210022  Monobloc Economy shaft extractor
US$85.50
A compact shaft extractor for the serious enthusiasts
and the smaller workshops. This extractor can be
held in a vise or bolted on to a bench without the
big footprint. This design has all the attributes of
the more powerful models in our range and can
last up to 500 extraction cycles.


Relate PartsOptions
  Quantity:
210200I-P3
210200I-P3
Hosel Lip Protectors for Irons Pack of 3
US$5.25
Qty:
210200W-P3
210200W-P3
Hosel Lip Protectors for Woods Pack of 3
US$5.25
Qty:
210225
210225
Aluminum hosel protector
US$7.25
Qty:

210300  Shaft pry bar
US$30.00
“Old school” 15” pry bar used for pushing clubheads off steel and
graphite shafts once the hosel has been thoroughly heated. Also
handy for shafts and mandrels that get stuck in the hosel. This
prey bar is sized for woods and irons and is best used with our
protective collars.


Relate PartsOptions
  Quantity:
210200I-P3
210200I-P3
Hosel Lip Protectors for Irons Pack of 3
US$5.25
Qty:
210200W-P3
210200W-P3
Hosel Lip Protectors for Woods Pack of 3
US$5.25
Qty:
 

020900  Auditor Golf Club MPS
US$1,376.00
A revolutionary and labor saving swing weight scale designed to absolete multiple quality control steps for clubs comming off the assembly line. The Auditor MPS captures swing weight, Total weight, club length, and CG location in under 30 seconds and can send the data to a barcode printer too!
(laser not included)


Relate PartsOptions
  Quantity:
020900-U1
020900-U1
Club Length Laser
US$400.00
Qty:
030010
030010
Clubmaker's Standard Calibration Stick
US$108.25
Qty:
SP-E060101
SP-E060101
Universal voltage AC/DC adapter 9V 500mA
US$10.25
Qty:

010500  Auditor Rule 60 lie and loft guage
US$1,875.00
lie and loft guage specimen used by Golf's governing bodies and some OEM's to explore golf club head specifications sequentially rather than concurrently.

Sequencing club head specifications allows for the measurement of lie, loft and face angle independently of each other while the head is manipulated to assume the most advantageous position specific to each variable.


Relate PartsOptions
  Quantity:
010001
010001
Desktop Swivel Stand
US$113.25
Qty:
010002
010002
Calibration block for all 010xxx Lie and Loft Spec Gauges
US$99.00
Qty:
 

010500D   Auditor Rule 60 Digital lie and loft guage
US$2,600.00
A lie and loft gauge specimen used by Golf's governing bodies and
some OEM's to explore golf club head specifications sequentially
rather than concurrently.
Sequencing club head specifications allows for the measurement of lie,
loft and face angle independently of each other while the head is
manipulated to assume the most advantageous position specific to
each variable.


Relate PartsOptions
  Quantity:
010001
010001
Desktop Swivel Stand
US$113.25
Qty:
010002
010002
Calibration block for all 010xxx Lie and Loft Spec Gauges
US$99.00
Qty:
SP-E060101
SP-E060101
Universal voltage AC/DC adapter 9V 500mA
US$10.25
Qty:

030125  Frequency Profiling Analyser
US$646.00
This is the manual version of the APS Heavy Duty frequency analyzer
030125-HD. We’ve replaced the pneumatic cylinders with our torque
limited knobs so that clubmakers that do not have access to an air
compressor can still perform advanced shaft zone profiling analysis
using our new Frequency Auditor engine and the optional zoning beam.


Relate PartsOptions
  Quantity:
030010
030010
Clubmaker's Standard Calibration Stick
US$108.25
Qty:
030120-SK1
030120-SK1
EngName
Torque Limited Knob set for 030xxx frequency analyzers
US$18.50
Qty:
030120-SK2
030120-SK2
Replacement clamping bolt and knob assembly
US$27.25
Qty:
030125-U1
030125-U1
APS Beam upgrade for 030125-HD
US$89.00
Qty:
030405
030405
Frequency Tip Weight with Built-In Laser
US$46.25
Qty:
030420
030420
Shaft Rotation Dial Indicator
US$30.75
Qty:
SP-E060101
SP-E060101
Universal voltage AC/DC adapter 9V 500mA
US$10.25
Qty:
  

030406  Fit Over Adapter Spining laser
US$65.00
This standard model has a tough Nylon collet and
is as effective as the HD model. This is best suited
for the occasional clubmaker. The assembly weighs
205 grams. Rings and battery included


Relate PartsOptions
  Quantity:
030406-16G
030406-16G
Stacking Ring for Spining Laser
SP-E0703-01
SP-E0703-01
CR2 battery for 030405 Frequency Laser tip weight
US$6.25
Qty:
 

030406-HD  Fit Over Adapter spining laser HD
US$87.20
An original idea we turned into reality that can potentially save a lot of time
and headaches for any clubmaker wanting to FLO shafts fitted with OEM
adapters! These two unique models fit over shaft adapters and bare shaft
tips using a large capacity collet that is hand tightened to securely fasten the
laser to the shaft with no backlash. Rings and battery included.


Relate PartsOptions
  Quantity:
030406-16G
030406-16G
Stacking Ring for Spining Laser
SP-E0703-01
SP-E0703-01
CR2 battery for 030405 Frequency Laser tip weight
US$6.25
Qty:
 

030407  Chucked frequency laser
US$70.00
A Chucked Tip weight and FLO tracer featuring our new stackable weights
that simulate the load applied to the shaft when the head is installed. The
simulated weight can also provide trimmed shaft frequency prior to assembly which can be a major plus when building frequency matched clubs. The chucked tip weight can be mounted on shafts with a tip diameter not exceeding 13mm or.510". 205 grams base weight. Rings and battery included.


Relate PartsOptions
  Quantity:
030406-16G
030406-16G
Stacking Ring for Spining Laser
SP-E0703-01
SP-E0703-01
CR2 battery for 030405 Frequency Laser tip weight
US$6.25
Qty:
 

060200  Grip And Shaft Dimensioning Combination Gauge
US$35.00
This versatile gauge will measure grip size and butt
end of shafts on both men’s and ladies’ clubs, including
undersized, standard and oversized. Easily measures
right-handed and left-hand grip size. Also
measures shaft tip


  Quantity:

070305  Auditor Inertia Chronograph
US$4,068.50
The first multiple-axis moment of inertia measuring instrument specifically designed for the golf industry. The AUDiTOR Inertia Chronograph is the only instrument to quickly and accurately measure MOI about 6 axes of rotation, in less than 15 minutes!


Relate PartsOptions
  Quantity:
070300-1
070300-1
Clubhead MOI Testing Fixture
US$283.25
Qty:
070300-2
070300-2
Hosel Adapter Pins set (.335 .370.410) for the Auditor Inertia Chronograph 070300
US$84.50
Qty:
070300-5
070300-5
Club Head MOI Hosel Adapter Pin (.410 ) Set of 3
070400
070400
Golf Clubhead CG Marker
US$37.00
Qty:
070410
070410
Levelling Golf Clubhead CG Marker with
US$ ASK!
SP-E060101
SP-E060101
Universal voltage AC/DC adapter 9V 500mA
US$10.25
Qty:

070410  Levelling Golf Clubhead CG Marker with
US$ ASK!
The Club-head Center of Gravity (CG) locator can be used to locate the
center of gravity position of woods, irons and putters on the vertical plane
(face) and horizontal plane (sole) of the clubhead, both of which are very
strong predicators of a clubhead's launch tendencies.


 

100601  DIY dial down gripper with pan. (TK)
US$37.00
A light clamp and tray assembly for regripping
all clubs like a pro. The clamp can also be used
on Shaft tips and butt for trimming and club
assembly. Not recomanded for professional use.


  Quantity:

1007XX-U2  Grip Tape Dispenser mounting bracket
US$14.50


  Quantity:

100905  Heavy Duty Self Contained Gripping Station
US$ ASK!
A self contained cabinet style gripping station equiped
with all the productivity tools a clubmaker can imagine!
Designed for OEM use in small manufacturing cells, This
Design is pneumatic, has a build in solvent dispensing
System that wets both the grip tape and grip. Auto cut
length grip tape dispensers , bifocal lasers are fitted as
standard and so is the fume extraction hood that makes
this unit OSHA compliant. All the controls are foot operated
leaving the operator to focus on proper grip installation.
Production capacity is over 60 grips/hour.


 

110860-U1  Laser mounting bracket for 110860 to 1007xx gripping stations
US$22.00


  Quantity:

130601  Universal Ferrule Turning Arm
US$35.00
A ferrule turning arm designed around 42" belt sanders.
This design allows the pod to rotate 30 degrees around
its base and has up to 4 inches of reach back and forth.
This makes for a very comfortable position from wich to
thin down ferrules of any size, hosel length or head size.
The shaft rest are made of non abrasive engineering
nylon. Bolts directly to the bench behind the motor.


  Quantity:

150004-00  Calibration gauges for Lie and loft bending machines
US$ ASK!
These are calibration gauges specifically designed to mount on
all existing lie and loft bending gauges regardless of model or
make. They provide the clubmaker who rely on a bending gauge
for clubhead specification to be within spec and peace of mind.

Please click on the option button to view individual specifications.


Relate PartsOptions
 
150004-0070
150004-0070
1508xx Putter bending gauge Lie & loft checker 0 loft /70 Lie
US$99.00
Qty:
150004-2760
150004-2760
Calibration Bloc 27 Deg Loft 60 Deg Lie for 150xxx gauges
US$99.00
Qty:
150004-5164
150004-5164
Calibration Bloc 51 Deg Loft 64 Deg Lie for 150xxx gauges
US$99.00
Qty:

150005-00  Hosel wall support rods
US$ ASK!
Machined rod that fit inside the hosel of irons and hybrids
prior to bending. The mandrell help support the wall hosel
do not collapse making it impossible to assemble a shaft.
The rod has a slide on handle that locks over the handle
to facilitate extraction should the rod get pinched.

This toll is near identical to what casting houses use for
Adjusting lie on as cast and as forged irons prior to
plating.

Please clickon the option button to view available specs.


Relate PartsOptions
 
150005-335
150005-335
Hosel wall support rod for .335 diameter hosels
US$35.00
Qty:
150005-370
150005-370
Hosel wall support rod for .470 diameter hosels
US$35.00
Qty:
 

150330-BCP  Bar code printer support port for 150330 (printer not included)
US$75.00


  Quantity:

170125+  Clubmaker's Ultimate Pneumatic Shaft Vise Clamp
US$300.00


  Quantity:

231300-1U  Hanging clip
US$100.00
A small hanging clip that fits in the back
of the grip vent hole. This allows the club
to be hung on a peg for display.

Sold in a bag of hundred.


  Quantity:


Home | Products | Company Info | Business | Register | Links
Return Policy | Order Procedure | Privacy & Security
© Copyright 2018. Technorama Co., Ltd.