Search    
User Info

New Products Sales Clearance Download

Contact Us

Follow golfmechanix on Twitter

ABOUT SSL CERTIFICATES

Golf club enhancement devices

290100  Graphite Shaft Extender
US$2.25
The Universal Shaft Extender is suitable for steel and graphite shafts
with an internal diameter in the range of 0.475 to 0.585 inches. The
extender is made of a carbon composite plastic stronger than steel.
This extender is conveniently marked at 0.5 inch intervals. The rings
act as a saw blade guide and allow for a clean square cut to be made.
Simplified Chinese  French Description  Japanese  Korean  

Relate PartsClick to view more
  Quantity:
290100-1U
290100-1U
Universal Shaft Extender (100 pcs)
US$216.25
Qty:
  

290110  Graphite Shaft Extender Standard
US$2.00
These extenders for standard graphite shafts will lengthen virtually
any golf club. Simply apply epoxy, slide the extender into the shaft
butt, allow the epoxy to cure, and cut to length. Great for salvaging
shafts trimmed by mistake!


Relate PartsClick to view more
  Quantity:
290110-1U
290110-1U
Graphite Shaft Extender Standard (100 pcs)
US$128.75
Qty:
  

290120-1U  Graphite Shaft Extender (0.520 Fit) Bag of 100
US$103.00
Graphite shaft extender suitable for shafts with a very large butt clearance, such as thin walled shafts. Fits into a .520 Bore


  Quantity:

290130-AS60  Aluminum Shaft Extender
US$1.25
The GOLFMECHANIX Aluminum Shaft Extenders for steel
shafts are a major improvement over the double ended
extenders commonly found in the trade. Weighing under
11 grams, our 3" long (75 mm) extenders, are lighter and
straighter, and feature an improved insertion bit 3/4" long
(35 mm) which requires very little adjustment for a tight
and secure fit. For both steel and graphite shafts.


Relate PartsClick to view more
  Quantity:
290130-AS60-1U
290130-AS60-1U
Aluminum Shaft Extender (100 pcs)
US$87.50
Qty:
  

Available in 0.560/ 0.580/ 0.600/ 0.620
290140-SS  Premium Chromalloy Double Ended Shaft Extenders
US$ ASK!
These Steel Shaft Extenders are produced from the same
chrome-alloys as steel shafts, conferring to the extenders the
fit and consistency of a like to like coupling. The extenders are
12" long with an 8 1/2" parallel mid sections that when cut in
the middle create two 4 1/4" extensions. Each section has a
swagged tapered end 1"5/8 long that fits perfectly inside the
shaft. The extenders are chrome plated.
Receiving shaft butt ID must be .02" (0.5 mm) larger then
the nominal butt OD .580 butt fits into a .600 shaft etc.


Please clikc the Option button for more.


Relate PartsClick to view more
 
290140-SS56
290140-SS56
Double ended Steel extenders for Steel shaft .560 butt
US$2.00
Qty:
290140-SS58
290140-SS58
Double ended Steel extenders for Steel shaft .580 butt
US$2.00
Qty:
290140-SS60
290140-SS60
Double ended Steel extenders for Steel shaft .600 butt
US$2.00
Qty:
290140-SS62
290140-SS62
Double ended Steel extenders for Steel shaft .620 butt
US$2.00
Qty:
  

290200-P6  Active vibration dampener. Pack of 6
US$9.99
The shaft vibration dampener is designed to work with most
steel golf shafts. The dampener dissipates negative vibrations
traveling along the shaft's walls from the tip upward towards the
golfer's hands.


  Quantity:


Home | Products | Company Info | Business | Register | Links
Return Policy | Order Procedure | Privacy & Security
© Copyright 2019. Technorama Co., Ltd.