Search    
User Info

New Products Sales Clearance Download

Contact Us

Follow golfmechanix on Twitter

ABOUT SSL CERTIFICATES

Re-gripping tools & grip tape dispensers

Makes Quick Work of Grip Installs & Removals
110851-UA  Air Gripper
US$47.50
The GOLFMECHANiX Air Gripper is designed to help you quickly install and safely uninstall grips. Thius total kit has two blow out tubes, duster hand high pressure hose fitted with a universal adapter. The blow out tubes are transparent and have machined ridges for better handling. Original grips inclduing oversized putter grips can be removed and preserved for re-installation without damage. Air compressor required.


  Quantity:

110810-12  12 Inch Long Spring Rod Grip Remover
US$22.75
This design is an alternative to using solvents or compressed air, allowing club-makers to reuse rubber or composition grips. There are no sharp edges, which prevents damage to grips.
French Description  Japanese  Korean  

  Quantity:

110810-20  20 Inch Long Spring Rod Grip Remover for Round Putter Grips
US$37.50
The Spring Rod Grip remover distinguishes itself from the blade style grip remover by its flexibility and edge to edge dual lifting action. Moving the rod in a figure eight motion with a slight solvent dip will help remove the grip with ease
French Description  Japanese  Korean  

  Quantity:

110860  Hi Power Compact Gripping Laser
US$299.75
A universal grip aliment laser powered by two industrial grade diodes
producing a super bright trace that projects down the shaft centreline
to aid with grip alignment. The pod installs directly on top of the vise
clamp just ew inches above the grip with the trace projecting fore
and aft along the length of the club.


Relate PartsOptions
  Quantity:
110860-U1
110860-U1
Laser mounting bracket for 110860 to 1007xx gripping stations
US$22.00
Qty:
SP-E060101
SP-E060101
Universal voltage AC/DC adapter 9V 500mA
US$10.25
Qty:
 

110800-12  12 Inch Classic Blade Style Grip Remover
US$20.50
Designed as an alternative to using solvents or compressed air, the Classic Blade Grip Remover allows club-makers to reuse rubber or composition grips.

The classic blade grip remover features a channel to funnel solvent under the grip to loosen the tape. The channel also strengthens the blade to give some leverage when working the grip loose. There are no sharp edges that may cut or slice through the grip.

Note: The Classic Blade Grip Remover may not work well with cord grips or Winn grips, grips that have underlistings or grips that do not stretch.
French Description  

  Quantity:

110800-20  20 Inch Classic Blade Style Grip Remover
US$37.50
This Classic 20" long grip installer is for removing those jumbo putter grips,
similar to the Odyssey Super Stroke, Winn's Pistol Belly Grip and Ping AVS 17.


  Quantity:

110210  Geared Grip Tape Dispenser
US$92.75
A robust grip tape dispenser with an automatic
backup tape pick-up mechanism. It uses a set
of gears to drive both the main spool and the
pick up spool so that the back up tape does not
get entangled.


Relate PartsOptions
  Quantity:
1102xx-SK1
1102xx-SK1
Spool and Cog kit for all our 1102xx-SK1
US$13.00
Qty:
  

110211  Geared Grip Tape Dispenser with Buildup Tape Spool
US$123.50
Built identically to the standard geared
grip tape dispenser, this model adds a
second spool to dispense grip build up
tape, eliminating the need for a second
grip tape dispenser.


Relate PartsOptions
  Quantity:
1102xx-SK1
1102xx-SK1
Spool and Cog kit for all our 1102xx-SK1
US$13.00
Qty:
  

Grip Tape Length Control!
110220  Metered Tape Dispenser
US$99.95
The only grip tape dispenser that dispenses the desired length of
grip tape accurately each and every time. The geared mechanism
dispenses grip tape from 1” to 11” in length. The back up tape is
automatically spooled leaving fingers dry and clean


Relate PartsOptions
  Quantity:
1102xx-SK1
1102xx-SK1
Spool and Cog kit for all our 1102xx-SK1
US$13.00
Qty:
1102XX-SK3
1102XX-SK3
Replacement cog & gear for 11022X Auto cut Grip tape dispensers
US$8.50
Qty:
 

110221  Metered Grip Tape Dispenser with Dual Spool
US$128.75
This dual purpose, cost saving grip tape
dispenser features both the metered grip
tape dispensing capability of the base
model and a second spool for dispensing
build up tape, eliminating the need for a
second grip tape dispenser.


Relate PartsOptions
  Quantity:
1102xx-SK1
1102xx-SK1
Spool and Cog kit for all our 1102xx-SK1
US$13.00
Qty:
1102XX-SK3
1102XX-SK3
Replacement cog & gear for 11022X Auto cut Grip tape dispensers
US$8.50
Qty:
 

110100  Grip Installer
US$11.25
An essential re-gripping tool for replacing worn-out grips and installing
new ones over large butt shafs . The installer stretches the grip mouth
evenly and guides it over the taped shaft. A must-have tool to prevent
grips from splitting during installation.
French Description  Japanese  Korean  

  Quantity:

110300  Grip Tape Remover
US$17.00
A tape scraper that easily peels off old grip tape
on steel and graphite shafts. A special bull-nose
blade prevents gouging the shaft!

This is not a throw away grip tape remover and
does not require sharpening as the blade can be
discarded & replaced!
French Description  Japanese  Korean  

Relate PartsOptions
  Quantity:
SP-S0120-P5
SP-S0120-P5
Replacement Blades for 110300 Grip tape remover (Pack of 5)
US$5.25
Qty:
  

110301  Tape Stripper
US$15.50
This handy tool saves you time and energy when stripping grip tape off a club. The cutting end is curved to fit the shaft, cleanly stripping tape from graphite or steel shafts in just a few strokes. Ball handle for comfort. The Tape Stripper's specia


  Quantity:

110320  Tape Removal Shaft Holder
US$10.25
The Tape Removal Shaft Holder is a device designed to hold the shaft in place and prevent damage to shafts during tape removal. One end inserts into the shaft, while the other is secured in a vise. The plastic safety stopper helps prevent the knife blade from breaking or losing its edge.
French Description  Japanese  Korean  

  Quantity:

110521  Professional Grip Knife
US$10.25
The best of the best utility knife for removing old grips, plastic collars, etc. The compound configuration positions the hand at the correct angle over the work. This allows firm and precise control of the blade while cutting, especially when pushing away from the body to prevent injury.
French Description  Japanese  Korean  

Relate PartsOptions
  Quantity:
SP-G0706-02H-1U
SP-G0706-02H-1U
Heavy duty Hook blade replacement for 110521 Pack of 10
US$7.75
Qty:
SP-G0706-02S-1U
SP-G0706-02S-1U
Heavy duty straight blade replacement for 110521 Pack of 10
US$6.25
Qty:
 

110710  Solvent Recovery Pan
US$16.50
A gripping pan that has a wide brim, slanted sides and a deep bottom to
prevent splatters and spills and helps with recycling expensive solvents to
the last drop!
This pan hooks up in seconds under the ledge of a workbench or in a
clamping vise. It is held securely in place by a slotted metal bracket that
makes installation and storage a snap. The gripping pan won’t sag or tip
over like a paint tray or liner.
French Description  Japanese  Korean  

  Quantity:

110730  Grip Dip Solvent Recovery Pan
US$25.75
A Solvent recovery pan well suited for high volume gripping where the shaft
butt is dipped directly into the solvent to wet the grip tape. This is a potentially
huge time saver for the volume assembler.
The deep and narrow pan design is good for minimizing solvent use and the
containement spill flaps double up as a cover to minimize evaporation when
the unit is not in use.


  Quantity:

110915  Putter Grip Aligning Gauge
US$45.00
The putter grip installation gauge is designed to assist in the proper
installation of putter grips. It provides a visual reference for aligning
the grip in relation to the putter top line so that the flat side of the
putter is always alined with the target.
French Description  Japanese  Korean  

Relate PartsOptions
  Quantity:
SP-E0703-01
SP-E0703-01
CR2 battery for 030405 Frequency Laser tip weight
US$6.25
Qty:
  

260501  Solvent Dispenser
US$36.00
Handy dispenser keeps chemicals such as mineral spirits, acetone, naptha, epoxy remover, and lacquer thinner from evaporating quickly and prevents dangerous spilling. A simple "tap" on the stopper/reservoir with a small towel, and the solvent pools to the top. Capacity 250 ml / 8.5oz
French Description  Japanese  Korean  

  Quantity:


Home | Products | Company Info | Business | Register | Links
Return Policy | Order Procedure | Privacy & Security
© Copyright 2018. Technorama Co., Ltd.