ABOUT SSL CERTIFICATES
CG & inertia surveying instruments
Golf Club MOI Speed Match System
The preferred method of advanced clubmakers to custom-fit golf clubs accurately, with a high success rate. Moment of inertia matching of golf clubs is based on Newton's second law of motion applied to rotational dynamics. The result is a set of golf clubs that maximizes feel and performance for golfers of all skill levels. Auditor MOI Speed Match software included!
MOI Calibration Stick for 070205
CAD can tell you what the MOI of a clubhead should be. Our MOI instrument will tell you what it is and how to optimize it.
AUDiTOR Inertia Chronograph
The first multiple-axis moment of inertia measuring instrument specifically designed for the golf industry. The AUDiTOR Inertia Chronograph is the only instrument to quickly and accurately measure MOI about 6 axes of rotation, in less than 15 minutes! Please inquire for availability and lead-time.
Clubhead MOI Testing Fixture
Hosel Adapter Pins set (.335 .370.410) for the Auditor Inertia Chronograph 070300
Club Head MOI Hosel Adapter Pin (.410 ) Set of 3
Golf Clubhead CG Marker
Golf Clubhead CG Marker
The best way to analyze perimeter weighting and off-center hits forgiveness of both woods and irons. Pinpoints the center of gravity of any clubhead within a millimeter.
Mass Property and CG Coordinates measurements in less than 5 minutes!
Precision Golf Club Head CG Locator
A specialist instrument for locating and measuring the CG coordinates of any golf clubhead in three axes, to within 0.5 mm. Also measures the CG angle of the club head. High precision electronics with advanced data collection software included. Please inquire for availability and lead-time.
070500 Auditor Precision Golf Club Head CG Locator
Production line Proven reliability with Lab accuracy!
R&A/USGA Portable CT Testing Pendulum
Used by major clubhead manufacturers to test for a "Spring Like Effect" of a clubhead striking face - whether woods, hybrids and irons - as specified by the R&A/USGA testing protocol for the determination of a clubhead's Characteristic time (CT).
The AUDiTOR CT distinguishes itself from similar devices by the precision and quality of its build and a second to none customer service. Whether used on the production floor or in the lab, the AUDiTOR CT will provide peace of mind test after test. This machine is sold to R&A/USGA license holders only. Machine ships ready to use. Light assembly required.
Alignment Laser for the R&A/USGA Portable CT Pendulum
.335 Clubhead Setup shaft to head Connector for R&A/USGA test Pendulum
.355 Clubhead Setup shaft to head Connector for R&A/USGA test Pendulum
.370 Clubhead Setup shaft to head Connector for R&A/USGA test Pendulum
.410 Clubhead Setup shaft to head Connector for R&A/USGA test Pendulum
R&A CT calibration Standard
.335.Head to shaft Connector for R&A/USGA test Pendulum. Ea.
.350 Head to shaft Connector for R&A/USGA test Pendulum. Ea.
.370 Head to shaft Connector for R&A/USGA test Pendulum. Ea.
Tee Handle for 070600-A (.335, .355, .370 and .410)
CR2 battery for 030405 Frequency Laser tip weight
R&A Golf Grip Scanner
We’ve designed this Golf Grip Line Scanner to digitize the contour of
golf grips for the purpose of investigating grip geometry and structure
that may reveal features deemed non-conforming under the rules.
While line scanners are nothing new, our design was build from the
ground up using off the shelve components which we drove using
software developed in house specifically for the purpose. This allowed
us to deliver a lean and highly efficient system at a reasonable cost.
Ultra High Speed Groove Scanner
Designed by special request for casting houses, to aid in the implementation of the R&A/USGA Clubhead Groove Conformance rule, the Auditor Ultra High Speed Groove Scanner integrates the best of the best non contact measurement devices and linear drive systems to achieve unmatched micron level accuracy at high speed.
Easy to operate and setup thanks to the in-house designed custom control software. The operator can select from several scan modes, each of which is optimized for speed, accuracy, surface condition, planarity and more.
Depending on the scanning method selected, scanning speeds of up to 1mm/s can be achieved resulting in a scan time ranging from 30~80s/clubhead.
Groove Scan Casting Kit
Built according to the specifications of golf’s governing bodies (USGA and the R&A), the GolfMechanix manufactured Groove Scan Prepping Kit has been upgraded to make groove print analysis quick and easy.
Groove Scan casting Dam set of 5
Surgical blades Pack of 5
Cutter Checker for R&A/USGA Conforming Grooves
The GolfMechanix R&A/USGA Conforming Groove Profile Cutter Checker is designed for checking the width and angle of cutters used specifically for engraving grooves on clubheads.
This easy to use precision microscope is an inexpensive alternative to the more expensive, cumbersome and difficult to use Shadowgraphs.
This compact desktop device features a special chuck/blade holder that positions the blade flat in relation to the viewing angle, so it can be measured accurately on a high-resolution reticle with a precision of 0.01 mm and a magnification of 20x.
A blur-removing sharp focus LED light, helps enhance edge contrast for added precision.
Contour Tracer Club Head Vise
Designed by special request for casting houses to aid in the implementation of the R&A/USGA Club-Head Groove Conformance rule. This infinitely variable adjustment vise provides the level of flexibility and ease of use needed to secure the club head to be scanned under a stylus type contour tracer with a high level of precision.
Suitable for both woods & irons, including drivers and hybrids, the vise gives the operator all the control needed to position, align and clamp the club-head in one easy setup, thanks to the visual alignment aids built into the design without interfering with the stylus escapement direction.
Privacy & Security
© Copyright 2017. Technorama Co., Ltd.